Lip Balm Kit Instructions

LIP BALM KIT INSTRUCTIONS

WHAT YOU’LL NEED

*NOTE: The type of lip balm base you use will be determined by whether you are making lip balm in a pot or in a tube. You can find both types here (Lip Balm Base). Each lip balm pot holds 8g while a tube holds 5g.

• 80g lip balm base for pots or 50g lip balm base for tubes (see note above about different bases)
• 2.4-4ml of flavouring (optional) for pots, 1.5-2.5ml for tubes
• Colouring (optional, and must be FD&C and oil based or lip safe mica)
• Sweetener (optional)
• 10 lip balm pots or tubes
• 1 Pyrex jug or other microwave-safe container
• Spouted plastic jug or disposable pipette (optional for pouring, see Step 6)
• 1 stainless steel stirring spoon

INSTRUCTIONS:
1. Place your lip balm base in the Pyrex jug or microwavable container.

2. Heat in the microwave just until the base begins to melt, remove and stir before heating again. As it doesn’t take a lot of heating to melt the base, with your spoon give it a quick stir occasionally throughout this process.

3. Once your base is completely melted, it’s time to add your flavouring and colour. However, if you prefer a totally natural and pure lip balm, feel free to skip this step. While you may need to experiment on quantity based on your brand of flavouring, it is generally used at a rate of 3-5% of the total base weight. **Never use candle fragrances, even if they are body safe. Body safe is a term used for skin safe fragrances and NOT for ingesting.

4. As most flavours are unsweetened, you can add sweetener to your base now.

5. Just like flavouring, colour is a personal choice and it can be difficult to measure particularly for small batches. Using a dropper can be really useful for this purpose. Work slowly and add in small doses at a time until you reach your desired shade. If using mica add very small amounts of the powder at a time until you reach your desired shade.

6. With your spoon, stir the base thoroughly before pouring in to your pots or tubes.
Depending on your confidence level, you can choose to pour straight out of the Pyrex jug, from a spouted plastic jug, or fill with a disposable pipette. When pouring in to pots, ensure there is enough space between each one just in case you spill. When pouring in to tubes, use a tube tray that holds them steady. Pour low and keep in mind that the hotter you pour, the more chance there is of cracks and holes appearing. The good news is that these can easily be filled by a double pour.